ATS
Air Compressor Filter + Drain and Differential Gauge - ATS
Size
Product:
- ambient temperature: 25°C
- working pressure: 7 bar
- Inlet air temperature: 20°C
P=3μ (class 3 ISO8573-1)
M = 1μ solid / 0,1 mg/m3 oil (class 2 ISO8573-1)
H = 0,01μ solid / 0,01 mg/m3 oil (class 1 ISO8573-1)
C = 0,003μ mg/m3 oil (class 1 ISO8573-1)
Filter components:
3) Diecasting aluminum housing chromate with polyester epoxy powder coating for corrosion resistance
4) Large capacity reservoir allows large condensate volume
5) Manual or Auto drain version
6) Drainage layer
7) High-efficiency filtration media
8) Support cylinder
The differential pressure gauge shows the level of element saturation.
Separator body in aluminum, chromo phosphate, and externally powder painted.
The closure provided by the seal cannot be opened while the filter is under pressure, offering additional protection.
In order to keep the compressed air quality standards, filter elements have to be replaced with original ATS elements every 6/12 months depending on ambient and compressor.
The replacement of filter elements is fundamental to ensure the maintenance of high performance, the quality of compressed air in compliance with international standards, low operating costs, and the protection of components and process downstream.
Omitted replacement of elements causes an increase in pressure drop through the system and subsequently an increase in operating cost.
Usage description:
The key to the effectiveness of FGO Gold filters lies in the high efficiency of their elements. These elements can retain up to 99.999% of contaminants while keeping the pressure drops to a minimum.
TECHNICAL FEATURES:
Vendor:
Warranty
Help Line
ShippingBuy It With
